Ultimos artículos publicados por Apple en su base de datos sobre problemas, soluciones y noticias acerca de su software y hardware…….

AirPort 3.0: AirPort Setup Assistant Does Not Accept High ASCII Characters

The AirPort Setup Assistant does not accept high ASCII characters. This

document explains the workarounds.

AirPort 3.0 Software: About the Two Versions of the AirPort Admin Utility

This document explains the differences in the two versions of the AirPort

Admin Utility found in the the AirPort 3.0 software.

Mac OS X: How to Zero All Data on a Disk

This document explains how to zero all data on a disk, a practice that

makes data on an erased (initialized) disk less recoverable.

Macintosh: Apple Products That Require an Ethernet Crossover Cable

This document outlines which Apple products require an Ethernet crossover

cable, and which can use a standard Ethernet cable when connecting

directly to another Apple product.

Power Mac G4: How to Differentiate Between Models, Part 2

This document compares features of the Power Mac G4 computers introduced

after July 2001 including the Power Mac G4 (QuickSilver, QuickSilver

2002, Mirrored Drive Doors, and FW 800).

iMac: Power Light Indicates Status

iMacs that have cathode-ray tube (CRT) monitors have a lighted power

button at the bottom right of the monitor that changes color and/or

pulses depending upon the computer’s status.

eMac computers and iMac

computers that have flat-panel displays have an LED at the bottom right

of the display that lights up or pulses depending up on the computer’s

status.

Mac OS X 10.2: How to Scan an Image Using Image Capture

This document contains instructions on how to scan an image using Image

Capture.

Bluetooth: Macintosh Computers With Built-In Bluetooth

This document outlines which Macintosh computers are available with

built-in Bluetooth modules.

Macintosh: Some Computers Only Start Up in Mac OS X

Some Macintosh computers start up only in Mac OS X. These computers can

run Classic, but they do not start up in Mac OS 9.

Power Mac G4 (FW 800): Apple Pro Speakers Not Recognized at Startup or

Wake From Sleep

An alert with this message may appear when you turn on your computer:

“Speaker Connection – The device plugged into the Apple speaker mini-jack

cannot be recognized. Remove the plug from the jack. Then plug it back in

and make sure it is fully inserted.”